Solutions
Index / Solutions / GigaSUPEX CAT6 System
GigaSUPEX CAT6 System

      PUCAKC GigaSUPEXCAT6 GigabitLan Cabling Solutions
      With the rapid progress of information society, the computer’s processing ability is stronger, the number of internet users is booming, user requirements are increasing, higher and higher demands are provided for LAN-attached devices and their application. For users, no matter which technology is adopted and which application is carried out, higher transmission bandwidth and faster transmission speed are required.
      1000BASE-T(4) has been officially issued in 1999, which use Cat5e cabling, 4 twisted-pair full-duplex parallel transmission and complex multilevel encoding (5 multilevel encoding of PAM-5), requires more DSP in each connection, including 4 RS cancellers, 12 NEXT cancellers, 4 balancers and other devices to make CAT5E to support gigabit transmission, but it is expensive and energy-consuming.
      If PUCKAC GigaSUPEX CAT6 Cabling System is adopted, namely meet the requirement of transmission performance and the best performance ratio. Due to 250MH physical bandwidth and outstanding performance indicators, inexpensive and simple electric devices can support gigabit transmission. On a long term basis, the return of investment in CAT6 is higher than that in CAT5E. Thus, the application of CAT5E is decreasing in the generic cabling field; the application of CAT6 is increasing.
      As the most fundamental and important information speedway in the intelligent building, the generic cabling system’s service life is subject to twenty years, therefore, new and updated high-speed applications in twenty years need to be fully considered which cabling design is carried out.
      The series of PUCKAC MegaSUPEX point-to-point generic cabling products makes attenuation value, near-end crosstalk attenuation, ACR, EMI and other indicators of point-to-pint channel substantially exceed CAT6 international standards of TIA/EIA 568-C and ISO/IEC 11801 in more scientific, excellent, accurate wirepair parallel transmission to more match with the impedance.
      Round contact pin is used for GigaSUPEX information module pin in unique GES structure and encircled interlacing technology to substantially enhance the performance of module transmission, reduce 3, 6 crosstalk factors of connectors and make the grade of module monomer test far beyond link-level module performance. In the meantime, all modules have passed the certification of unit test conducted by ETL &3P.
      For the cabling system, one more connection means the decline of performance; for users, one more connection means the rise of flexibility. In face of more strict CAT6 system, when many manufactures only make efforts on two standardized connection links, PUCAKC MegaSUPEX CAT6 System has reached and exceeded standard requirements earlier up to four connections.

      The series of PUCKAC MegaSUPEX CAT6 products does not take the standard as its final goal, pursues the exceeding and accomplishes technology leadership, and ensure that test indicators upon the completion have more remaining performance as compared to the CAT5E system, is included into 25-year quality assurance system.
      2.1 Work area subsystem
      2.1.1 Information module

      GigaSUPEX Cat6 non-shielded module（PC26131） GigaSUPEX Cat6 shielded module（PC26231）
      -Retardant materials against high pressure is adopted for module body, UL94V-0 grade, quick connected
      -Keystone modularized non-routing design, no routing tools for the installation
      -Adopt the original structure and innovative anti-balance technologies, effectively eradicate crosstalk disturbance
      - Transmission performance exceeds TIA 568-C-1 Cat6 and ISO / IEC 11801 Class E in an all-dimensional way, the bandwidth of standard products is 250MHz.
      -All-metal jacket is adopted for the shield, ni-plated on the surface, compact structure, shielded in 360 degrees
      -8-pin contact material,50u overall gold-plated layer, phosphor bronze IDC terminal
      -Common design and mark, support two terminating ways of T568A and T568B
      -IDC terminal support the cable of 22-24 wire gauge
      Pass UL certification; pass the UT certification of 3P and ETL

      -Round contact pin is adopted for modularized pin, unique GES structure, encircled interlacing technology, enhancing the performance of module transmission.
      -50μgold plating process, better than partial gold-plating and flat golden structure to ensure the responsive stress.
      -The grade of module monomer test is far above link-level module performance
      -Non-welded-point design is adopted for the connection of contact pin and circuit board, lead-free and environmental-friendly, contact resistance is below 42mΩtransmission resistance, far beyond standard requirements with excellent consistency and stability.
      2.1.2Information panel
      Twoport flat information plate（PC8112）Built-up module of information port

      -Connect to Keystone information module, ST, SC, LC, FC optical module
      -The plate is in a double-layer structure, the screw is not necessary to be dismantled to clamp and maintain information module, screw hole is hidden from the surface to facilitate the construction and maintenance.
      -The plate has single-ported, two-ported, three-ported and four-ported configuration to match multi-information ports; 1-4 ports are applied fast and conveniently to enhance the overall flexibility of the system.
      -Modularized structure can be dismantled single-sided with protective doors.
      - Retardant materials against high pressure is adopted for the plate, UL94V-0 grade
      -The label box can mark various types of information points.
      The plate is corrosion resisting and dull polished to prevent color fading and the scratch
      -86 x 86 mm frame
      2.1.3 Data jumper

      GigaSUPEX Cat6 non-shielded jumper（PC46351X） GigaSUPEX Cat6 shielded jumper（PC46451X）
      -Non-shielded and shielded jumper, aluminum foil shielded structure provides sound electromagnetic performance
      -24AWG (non-shielded), 26AWG (shielded), multistrand flexible line, compatible with T568A/B.
      -Sound electrical performance and continuous steadiness, ensure the transmission stability
      -The length and color can be selected, antiskid plug sheath matching the color of the cable is installed
      - Transmission performance exceeds TIA 568-C Cat6 and ISO/IEC 11801 Class E in an all-dimensional way
      -Unique outer-sheath design, protect plug hasp to ensure the plug’s service life and reliability
      -100% pass the exfactory inspection
      2.2 Horizontal twisted-pair
      2.2.1 Horizontal twisted-pair
      GigaSUPEX Cat6 non-shielded twisted-pair（PC161211）      GigaSUPEX Cat6 shielded twisted-pair（PC162211）
      - Transmission performance exceeds TIA 568-C Cat6 and TIA 568-C Cat6 in an all-dimensional way, the bandwidth of standard products is 250MHz.
      - A better shielding effectiveness from aluminum foil shield
      - Excellent NEXT near-end crosstalk and RL performance, meet EMC required by the best environment
      -Spiral cross skeleton may reduce damages caused by heavy load and kink during the installation to ensure installation quality.
      -Pass the ETL, UL certification
      -Several fireproofing outer sheath materials can be chosen by users: CM, CMR, CMP and LSZH
      -25-years link quality assurance

      2.3 Administration subsystem
      2.3.1 1HU 24 Port blank quick connect patch panel

      1HU 24 Port blank quick connect patch bay

      -Provide two specification of 48 PORT 1HU & 24 PORT 0.5HU
      - FTP & UTP ensure the selection of many requirements
      -Special cable fixing device to ensure the fast and reliable cable installation
      -Metal structure, LXB is additional to the connecting rack, gain in strength for cable management
      -Transmission performance exceeds TIA 568-C Cat6 and ISO / IEC 11801 Class E in an all-dimensional way
      -Bi-level, manual screw positioning, easily move and routing
      -8-pin contact material, 50u overall gold-plated layer, round pin structure, phosphor bronze IDC terminal
      -Common design and mark, support two terminating ways of T568A and T568B
      -IDC terminal support the cable of 22-24 wire gauge
      -Specialized earth fixing device for cable shield to ensure the fast and reliable cable earthing

Copyright © 2011, Puckac Inc. | 京ICP备18058948号